We use RF because it requires very little power (great for battery life) and it can transmit a signal up to about 1000 feet (great for meter pits that are far. It then sends this information using Radio Frequency (RF) to the Flume Bridge. Allowing the end-user to detect small leaks, gain real-time information on household water consumption, set water goals and budgets, and receive push notifications when suspicious water activities occur. The Flume Water Sensor simply straps onto your meter, and it measures this magnetic field from the meter. Flume monitors the real-time status of your home water meter. If none of the above steps work, please contact Flume support. Follow the instructions listed in the app to recalibrate. From there, select 'recalibrate Water Sensor'. Select 'settings' > 'other troubleshooting'. Locate the three horizontal lines at the top left of your screen. (Outdoors of course, excavating all the stuff and bee hives in the meter box is a chore, and I suspect the location of the base station might need a bit of experimentation. The Flume integration will show you the current Flume status for the given Device ID. Try recalibrating your Flume Water Sensor. Once you have both readings you will subtract the two readings to get the number of gallons (or cubic feet) used If the meter reads in Cubic Feet, simply multiply the difference by 7.48 to convert to gallons. The sample meter image below reads 202126.04 Cubic Feet. Since it just straps on, as easy as your own belt, attachment is really easy for the basement locations. Now it’s time to read the number on the meter.This meter easily attaches to your current flow meter and allows you to monitor your water usage from your smartphone. Even their "calibration" instructions are really about it learning If you have a traditional water flow meter on your home, but need something more advanced, then this smart meter from Flume should do the trick. Since it is not using it's own mechanical flow sensor, but is snooping on the water company's very reliable and accurate meter, this thing is just reporting what the water company's meter is sensing.Since meters are brass, the field passes through the housing of the meter.It probably looks something like this: You will need to lift the lid in order to access your water meter. It may also be on a footpath leading to your house. Surprises are fun, but not when it comes to leaks. In many states (CA, OH, CO, FL, NC, etc.), your water meter is most likely located in a cement/metal pit near/on the street in front of your house. Flume enables customers to manage, monitor, and conserve water in their home. Looking at the FCC report, it uses a magnetometer sensor to sense changes in the magnetic field from internal rotation inside the water meter. The Flume app connects with a Flume Water Sensor installed on your home’s water meter. never any connection issues or need for technical support! I see similar things from any dripping faucet or loose garden hose connection still pressurized.The 3rd tall spike from the left is the tank filling, then water trickled at 0.1 gpm until my app told me there was a potential leak.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |